Do you need a little more WiFi coverage? TP-Link & # 039; s RE220 is a great affordable option.

TP-Link RE220 review

TP-Link is known in the game for wireless networks and the recent release of the RE220 range extender further reinforces its setup. It is a major step forward on the extremely popular (but aging) TP-Link N300, which offers single-channel speeds of up to just 300 Mbps. Although the older hardware is still being sold, many people with a more modern main router with 2.4 GHz and 5 GHz bands can now take advantage of the RE220, which delivers smart redesign and combined speeds of up to 750 Mbps. I used the RE220 range extender for about a week to see what it's all about.

Boost your wifi


TP-Link RE220 range extender

$ 30

Bottom line: If you want to expand the signal from your low- or mid-range router, the RE220 from TP-Link is an affordable option that gets the job done.

Pros

  • Can use one tire for special backhaul
  • Can be used as an access point
  • Streamlined design
  • Easy installation and management
  • Respectable performance and range

Cons

  • No automatic switching between tires
  • None the best option for use with a powerful router

What are you going to do love over the RE220 range extender from TP-Link

Instead of the boxy design with external antennas that the older N300 extender uses, the RE220 has been refined into a slim, small package that looks more like a plug-in air freshener than a range extender. The three antennas are hidden on the inside, the Ethernet port is hidden on the bottom and there is a single WPS button on the front, along with five status lights that tell you almost everything you need to know at a glance. It is so small that you can connect it almost anywhere without the risk of attaching both wall plugs.

Category spec
Performance AC750
(300 Mbps + 433 Mbps)
Frequency 2.4 GHz, 5 GHz
Wireless standards 802.11a / b / g / n / ac
antennas Three internal
ports One Ethernet
Dimensions 4.3 inch x 2.6 inch x 3.0 inch
(110 mm x 65.8 mm x 75.2 mm)

Installation can be done with the TP-Link Tether app (available for Android or iOS), with a web browser, or by pressing the WPS button on your main router and doing the same on the RE220 when it is connected. I couldn't seem to make the WPS method work properly, but with the app installed – giving you access to many more options anyway – it took only about two minutes to start the installation. I have connected my phone to the Wi-Fi signal from the extender, selected a password, selected the 2.4 and 5 GHz networks projected by my main router and entered their respective passwords. Once this is complete, the EXT-attached networks (you can change the names) will appear on my devices.

A status light on the front of the RE220 lets you know if you are within the optimum range of your main router and you are free to place the extender somewhere else until you find an ideal place. A connection is handled automatically when it is reconnected, so don't worry there. By default, the RE220 transmits and extends both the 2.4 and 5 GHz bands simultaneously, giving you more options for connecting your devices. The disadvantage is that backhaul traffic over the same radio & # 39; s speeds speeds in two. To solve this problem, TP-Link has added a "High-Speed ​​Mode" with which you can choose one or the other radio for backhaul traffic. The performance is considerably better, but you only extend the 2.4 or 5 GHz band with the others reserved for the signal back to your main router.

To test how well the TP-Link RE220 extends the range of my dual-band router, I first conducted some tests to see which Wi-Fi speeds I regularly achieve without an extender. I use a Hitron router supplied by an ISP and live in a house that is approximately 1100 square meters in size.

Hitron (2.4 GHz)

Place Ping Down speed On speed
Office (30 feet) 12 ms 45.26 Mbps 15.48 Mbps
Basement (40 feet) 11 ms 24.79 Mbps 13.11 Mbps

Hitron (5 GHz)

Place Ping Down speed On speed
Office (30 feet) 10 ms 57.01 Mbps 15.84 Mbps
Basement (40 feet) 10 ms 25.88 Mbps 15.46 Mbps

I then placed the RE220 about halfway between the location of the router in the living room and my office on the same floor, and then I moved the extender about halfway between the main router and the back corner of my basement. Most people will not want to move the extender once it has found a suitable place, but for testing this was necessary. The range extender had both bands active for these tests, which means that there was no special backhaul band involved.

TP-Link RE220 range extender (2.4 GHz)

Place Ping Down speed On speed
Office (30 feet) 10 ms 27.54 Mbps 15.56 Mbps
Basement (40 feet) 11 ms 42.77 Mbps 15.78 Mbps

TP-Link RE220 range extender (5 GHz)

Place Ping Down speed On speed
Office (30 feet) 10 ms 47.89 Mbps 15.83 Mbps
Basement (40 feet) 10 ms 35.84 Mbps 15.6 Mbps

Although both bands saw a decrease in performance in the relatively nearby office range, there was a bit of a boost for both bands when testing in the longer basement. If you want both bands to always be in play, you may not see the best performance unless you have a much larger house with corners that can't be hit with your main router.

I then switched on the High-Speed ​​mode of the RE220, with which you can choose the 2.4 GHz or 5 GHz radio as a special backhaul band between the extender and the main router. I have performed the same tests again with the 5 GHz band that supplies backhaul to the main router, keeping the 2.4 GHz radio open for connecting devices.

TP-Link RE220 range extender (5 GHz backhaul)

Place Ping Down speed On speed
Office (30 feet) 10 ms 108.04 Mbps 15.80 Mbps
Basement (40 feet) 11 ms 98.59 Mbps 15.42 Mbps

It's clear that you'll get a huge increase in performance by reserving the 5 GHz band for backhaul traffic, but it also means that you can't connect devices to the 5 GHz band. Again I performed the tests, this time with the 2.4 GHz band that supplies backhaul and the 5 GHz band that connects to devices.

TP-Link RE220 range extender (2.4 GHz backhaul)

Place Ping Down speed On speed
Office (30 feet) 11 ms 53.41 Mbps 15.87 Mbps
Basement (40 feet) 10 ms 100.44 Mbps 14.74 Mbps

The use of the 2.4 GHz band for backhaul traffic does not provide exactly the same performance at the nearest range, but performs better over long distances. If you have a medium-sized house and you are busy extending one or the other band (reserve the other for backhaul), the RE220 should do an admirable job. For those with a wired network, there is also the option to use the Ethernet port on the extender to set up an access point, which creates a completely new wireless network. The same Ethernet port can also be used to connect a nearby wired device.

The RE220 from TP-Link is a versatile, slim range extender that is easy to set up and easy to manage.

TP-Link claims that the RE220 can extend your router to around 3200 square feet. It is certainly an exaggeration for my 1,100 square foot home, and I saw a performance drop closer when I did not use a special backhaul band, so although it might not quite hit the number of claimed hits, it should be suitable for multi-level homes with many users.

Within the app or browser you have access to a large number of settings, including security protocols, DNS, Ethernet port host network, energy planning (you can allow the extender to fall asleep at certain times), a device blacklist, settings for high-speed mode, LED controls and firmware updates. Everything is well laid out and there is not much confusion about the menus. It may not be as in-depth as some network providers would like, but for most people the available settings should satisfy.

What are you going to do aversion over the RE220 range extender from TP-Link

I have had no problems with the RE220 for about a week when using the RE220. The signal did not drop, it promptly responded to any changes to the settings and it addressed all the devices I had connected. However, there are a few things to keep in mind.

There is no automatic band control here, so you must choose the 2.4 or 5 GHz network on your device and hold it until you switch it manually. If you're interested in switching your devices between radios, as performance dictates, you probably want to watch a mesh Wi-Fi network system, especially if you're having trouble reaching all corners of your house .

The theoretical speed of the RE220 from AC750 – 300 Mbps via the 2.4 GHz radio and 433 Mbps via the 5 GHz radio – does not match well with a high-end main router and you will probably only see less performance. The RE220 is best combined with a router with a low or medium range, which most people use.

If you have the TP-Link RE220 range extender?

Given the price tag of $ 30 and the fact that I really had no problems with the RE220, except that the fast WPS connection does not work, the RE220 range extender is easy to recommend. It is versatile thanks to an Ethernet port and High-Speed ​​mode that allows you to choose a band for special backhaul, and it will significantly expand your network. It is easy to set up and manage and there is always 24/7 technical support ready to give you a hand.

4.5
from 5






As long as you are not looking for something that matches your powerful, powerful main router and don't mind having automatic tape control, the RE220 is a cost-effective way to get all corners of your house in a Wi-Fi signal. Despite the low price, the RE220 comes with a two-year warranty if something fails, giving you a little extra peace of mind.

Boost your wifi


TP-Link RE220 range extender

Affordable networking

The RE220 from TP-Link is a slim, versatile range extender that does the job without many problems. It is easy to set up and manage, it has a High-Speed ​​mode that allows you to choose a band for special backhaul, and the Ethernet port can be used to set up an Access Point for extra versatility.

This message may contain links. Consult our disclosure policy for more information.

!function(f,b,e,v,n,t,s){if(f.fbq)return;n=f.fbq=function(){n.callMethod?
n.callMethod.apply(n,arguments):n.queue.push(arguments)};if(!f._fbq)f._fbq=n;
n.push=n;n.loaded=!0;n.version=’2.0′;n.queue=();t=b.createElement(e);t.async=!0;
t.src=v;s=b.getElementsByTagName(e)(0);s.parentNode.insertBefore(t,s)}(window,
document,’script’,’https://connect.facebook.net/en_US/fbevents.js’);
fbq(‘init’, ‘1674633419534068’);
fbq(‘track’, ‘PageView’);

(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)(0);
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = “http://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.7”;
fjs.parentNode.insertBefore(js, fjs);
}(document, ‘script’, ‘facebook-jssdk’));

var fbAsyncInitOrg = window.fbAsyncInit;
window.fbAsyncInit = function() {
if(typeof(fbAsyncInitOrg)==’function’) fbAsyncInitOrg();
FB.init({
appId: “291830964262722”,
xfbml: true,
version : ‘v2.7’
});

FB.Event.subscribe(‘xfbml.ready’, function(msg) { // Log all the ready events so we can deal with them later
var events = fbroot.data(‘ready-events’);
if( typeof(events) === ‘undefined’) events = ();
events.push(msg);
fbroot.data(‘ready-events’,events);
});

var fbroot = $(‘#fb-root’).trigger(‘facebook:init’);
};